Window Visor Rain Guards for Model 3/Y

These custom-fit window visor rain guards install directly onto the exterior window frames of your Tesla Model 3 or Model Y using pre-applied 3M adhesive. This aerodynamic four-piece set allows for fresh air circulation while keeping rain out and is designed to fit all versions, including the Highland and Juniper models.

Enhance comfort and ventilation in your Model 3/Y with our premium window visor rain guards featuring aerodynamic design and custom-fit precision. Crafted to match original car curvature with 45-degree arc-shaped chamfer, this 4-piece set allows fresh air circulation while keeping rain out—step-down design prevents water from entering cabin, eliminates smoke odors, prevents window fogging, and reduces wind noise, easy 3M adhesive installation leaves no residue.

Product Specifications:

• Type: Window visor rain guards (4-piece set)
• Design: 45-degree arc-shaped aerodynamic chamfer
• Material: High-quality weather-resistant plastic
• Compatibility: Model 3 (2017+, all versions), Model Y (2020+, all versions)
• Package: 4 pieces (front left/right, rear left/right)
• Installation: 3M no-trace adhesive backing
• Installation Time: 15-20 minutes
• Features: Rain protection, ventilation, aerodynamic, anti-fog
• Benefits: Fresh air, smoke elimination, heat escape, reduced wind noise
• Note: Fits all Model 3/Y versions including Highland and Juniper

Installation Guide:

Preparation:

1. Clean window frame edge area thoroughly with isopropyl alcohol
2. Dry surface completely with microfiber cloth
3. Ensure temperature is above 60°F for optimal adhesion
4. Test fit visors to verify proper alignment before installation

Installation Steps (Per Window):

1. Clean window frame edge with isopropyl alcohol
2. Dry surface thoroughly
3. Remove visor from packaging
4. Test fit visor on window frame to verify alignment
5. Peel backing from 3M adhesive tape
6. Carefully align visor with window frame edge
7. Press visor firmly onto frame starting from center
8. Work outward applying even pressure along entire length
9. Hold pressure for 30 seconds to ensure strong bond
10. Verify visor is securely attached and properly aligned
11. Repeat for remaining three windows
12. Avoid car wash for 48 hours to allow full adhesion

Installation Time: 15-20 minutes for all four windows. No tools required.

Package Includes:

• 4x Window Visor Rain Guards (front left/right, rear left/right)
• Pre-applied 3M adhesive backing
• Installation instructions

Ventilation Benefits:

• Fresh air circulation—even during rain
• Smoke elimination—allows odors to escape
• Heat escape—reduces interior temperature
• Prevents fogging—improves air circulation
• Reduces condensation—keeps windows clear
• Comfortable environment—maintains air quality

Common Questions:

Q: Will these fit Model 3 Highland and Model Y Juniper?

A: Yes, designed to fit all Model 3 versions (2017 onwards including Highland) and all Model Y versions (2020 onwards including Juniper).

Q: Do they really keep rain out?

A: Yes, step-down design effectively prevents rainwater from entering car when windows are cracked open 1-2 inches for ventilation.

Q: Will they create wind noise?

A: No, 45-degree aerodynamic chamfer design actually reduces wind resistance and minimizes noise during highway driving.

Q: Is installation difficult?

A: No, very simple. Clean window frames, peel adhesive backing, align and press firmly. Takes 15-20 minutes for all four windows.

Q: Can I remove them if needed?

A: Yes, 3M no-trace adhesive can be removed cleanly with heat (hair dryer). Won't leave residue or damage paint.