Premium Metal Tail Badge Emblem

This premium metal tail badge emblem is a high-quality styling upgrade that installs directly onto your vehicle's rear trunk, fenders, or any flat exterior surface using a simple peel-and-stick adhesive. Inspired by launch edition aesthetics, it is available in two distinct designs—Type A with enhanced detailing and Type B with a streamlined look—to provide a unique, personalized appearance for your Tesla.

Add a distinctive, exclusive touch to your vehicle with our premium metal tail badge emblem. Featuring a sleek, modern design inspired by launch edition styling, this high-quality metal badge enhances your vehicle's rear appearance with a sophisticated, performance-oriented aesthetic—making your ride stand out with a unique, personalized look.

Choose Your Type:

• Type A: Premium design with enhanced detailing
• Type B: Classic streamlined design

Perfect Placement Ideas:

• Rear trunk lid (classic badge location)
• Rear fenders
• Side panels
• Frunk lid
• Charging port area
• Custom locations for unique look

Product Specifications:

• Type: Premium metal tail badge emblem
• Material: High-quality metal alloy
• Finish: Smooth, shiny, fade-resistant coating
• Design: Launch edition inspired styling
• Type Options: Type A (enhanced detail) or Type B (streamlined)
• Adhesive: Industrial-strength adhesive backing
• Installation: Peel-and-stick (no tools required)
• Durability: Weather-resistant, fade-resistant, long-lasting
• Appearance: Modern, performance-oriented aesthetic
• Compatibility: Universal—Model 3, Y, S, X, Cybertruck, any vehicle
• Placement: Any flat surface (exterior)

Installation Guide:

Surface Preparation (Critical for Best Results):

1. Choose clean, flat placement location on trunk or fender
2. Clean surface thoroughly with isopropyl alcohol (70%+)
3. Ensure surface is completely dry and free of dust, oil, wax, or moisture
4. Work in moderate temperature (60-80°F / 15-27°C) for optimal adhesion

Installation Steps:

1. Test fit badge position before removing adhesive backing
2. Mark placement with painter's tape if desired for perfect alignment
3. Peel off adhesive backing carefully
4. Align badge with desired position
5. Press firmly in center, then work outward to edges
6. Apply firm, even pressure across entire badge for 30 seconds
7. Press edges firmly to ensure complete contact
8. Allow adhesive to cure for 24 hours before car wash or rain exposure

Installation Time: Less than 5 minutes. No tools required.

Package Includes:

• 1x Premium Metal Tail Badge Emblem (type as selected)
• Pre-applied adhesive backing
• Installation instructions

Removal Instructions (If Needed):

1. Warm badge with heat gun or hair dryer on LOW setting
2. Gently peel from one corner, applying heat as you go
3. Pull slowly at 45-degree angle to avoid surface damage
4. Remove any adhesive residue with isopropyl alcohol or adhesive remover
5. Surface should be undamaged and ready for new badge if desired

What Makes This Badge Special:

This exclusive tail badge represents:

• Launch edition inspired design (limited, exclusive aesthetic)
• Performance-oriented styling (advanced technology symbol)
• Premium quality (metal construction vs. plastic)
• Unique customization (stand out from standard vehicles)
• Collectible appeal (special edition appearance)
• Modern design language (complements contemporary styling)