Thunder Side Camera Cover for Model 3/Y

These Thunder-style decorative covers install directly over the fender-mounted side cameras of your Tesla Model 3 or Model Y using pre-applied 3M adhesive. They provide a sporty performance aesthetic and are available in both red and glossy black finishes to customize your vehicle's exterior.

Enhance your Model 3/Y exterior with our Thunder-style side camera decorative cover featuring aggressive sporty design. Crafted from premium ABS material with precise fitment, this protective cover shields fender-mounted side cameras while adding distinctive thunder-pattern styling—available in red or glossy black finishes, easy installation with pre-applied 3M adhesive requires no modifications, protects cameras from road debris and weather while elevating exterior aesthetics.

Choose Your Color:

• Red: Bold sporty accent, eye-catching performance look
• Glossy Black: Sleek sophisticated finish, matches factory trim

Product Specifications:

• Type: Side camera decorative cover (thunder pattern)
• Material: Premium ABS plastic
• Colors: Red, Glossy Black
• Design: Thunder-pattern styling
• Compatibility: Model 3 (2017-2023.10), Model Y (2020-2025.03)
• Installation: Pre-applied 3M adhesive tape
• Installation Time: 5 minutes
• Features: Camera protection, weather-resistant, sporty styling
• Benefits: Debris shield, enhanced aesthetics, easy install
• Note: Not compatible with Highland (2024+) or Juniper (2025+)

Installation Guide:

Preparation:

1. Clean fender camera area with isopropyl alcohol
2. Dry surface completely with microfiber cloth
3. Ensure temperature is above 60°F for optimal adhesion
4. Test fit cover to verify alignment before removing adhesive

Installation Steps (Per Side):

1. Clean camera housing area with isopropyl alcohol
2. Dry surface thoroughly
3. Remove thunder cover from packaging
4. Test fit cover on camera housing to verify alignment
5. Peel backing from pre-applied 3M adhesive
6. Carefully align cover with camera housing contours
7. Press cover firmly onto surface starting from center
8. Apply even pressure across entire cover for 30 seconds
9. Ensure all edges are securely adhered
10. Repeat for opposite side camera
11. Avoid car wash for 24 hours to allow full adhesion

Installation Time: 5 minutes for both sides. No tools required.

Package Includes:

• 2x Thunder Side Camera Covers (color as selected)
• Pre-applied 3M adhesive tape
• Installation instructions

Camera Protection Benefits:

• Shields from road debris—prevents stone chips and scratches
• Weather protection—guards against rain, snow, and ice buildup
• UV resistance—prevents camera housing discoloration
• Impact absorption—ABS material cushions minor impacts
• Maintains camera function—doesn't obstruct camera view or operation
• Extends camera life—reduces wear from environmental exposure

Common Questions:

Q: Will this fit Model 3 Highland or Model Y Juniper?

A: No, designed for pre-Highland Model 3 (2017-2023.10) and pre-Juniper Model Y (2020-2025.03). Not compatible with 2024+ Highland or 2025+ Juniper.

Q: Does it affect camera functionality?

A: No, cover is designed to protect camera housing without obstructing camera lens or affecting Autopilot/FSD functionality.

Q: Is installation difficult?

A: No, very simple. Clean surface, peel adhesive backing, align and press firmly. Takes about 5 minutes for both sides.

Q: Can I remove it if needed?

A: Yes, can be removed carefully. May require heat and adhesive remover to clean residue. Not designed for frequent removal.

Q: Which color should I choose?

A: Red adds bold sporty performance accent. Glossy black provides sleek sophisticated look matching factory trim. Choose based on your styling preference.